LENSTIC
How a trace works

One magnet, followed back to the mine.

A magnet passes through five kinds of company before it reaches your product. A trace starts at the product and works back through them, one supplier at a time. Here is one example, step by step.

Documented Unknown Covered-country step identified Example only. Not a real product or supplier.
06 · ProductYour productReading the parts list
Step 1 of 6

Start with your product

Anything with a motor, an actuator or a sensor has magnets in it. You are the one who certifies where they came from.

Under the rule
What you certify
What we do
You send the bill of materials for one product. We pick out every part with a magnet.

Who built the motor?

05 · MotorGermanyTracing
Step 2 of 6

The motor maker

The motor maker buys finished magnets and builds them into the rotor. Its declaration covers its own step: where the motor was built.

Under the rule
Where the magnet ends up
What we do
We check the motor maker against our graph. With your authorization, we ask it for origin documents on its magnets.

Who made the magnets?

04 · MagnetJapanTracing
Step 3 of 6

The magnet maker

Alloy is milled to powder, pressed in a magnetic field, baked solid, then cut and coated. A magnet maker's declaration covers only its own step, so the trace keeps going.

Under the rule
Restricted today if made in China, Russia, Iran or North Korea
What we do
We ask where its alloy came from and attach the source. A magnet made in Japan can still carry material from somewhere else.

Who melted the alloy?

03 · AlloyJapanTracing
Step 4 of 6

The alloy source

Rare-earth oxides are turned into metal, then melted with iron and boron into the alloy a magnet is made from.

Under the rule
Restricted today if melted in China, Russia, Iran or North Korea
What we do
The same request, one tier further back: where did the oxide come from?

Who separated the rare earths?

02 · SeparationNot disclosedTracing
Step 5 of 6

The separation plant

Mined concentrate is dissolved and the individual rare earths are pulled apart. China does 90% of rare-earth refining and separation.

Under the rule
Added on contracts awarded from January 1, 2027
What we do
In this example the supplier does not say. We mark the step unknown and introduce suppliers whose chain is already documented.

Where was it mined?

01 · MineAustraliaTracing
Step 6 of 6

The mine

Ore is dug, crushed and concentrated. This is as far back as the rule reaches, and as far back as a trace goes.

Under the rule
Added on contracts awarded from January 1, 2027
What we do
In this example the mine is on record. Five steps are documented and one gap is marked.
The three results

Every step ends one of three ways

Documented

A source is attached that shows who did the step and where.

Unknown

The supplier did not say, or the record stops. The gap is marked, not guessed at.

Covered-country step identified

The record shows a step in China, Russia, Iran or North Korea. It is marked, with the source.

What you get

The file for that part

Every step with its result and its source, and for each gap, an introduction to suppliers whose chain is already documented. Fixed price per product, three weeks.

Example fileOne part: drive motor
Motor makerGermanyDocumented
Magnet makerJapanDocumented
Alloy sourceJapanDocumented
SeparationNot disclosedUnknown
MineAustraliaDocumented
Gap at separation. Two documented suppliers introduced.

Example only. Not a real product or supplier.